Rear brakes

Part No: LWZ205
  In Stock
WASHER-SPRING, 5/16''
Required Quantity: 6
$0 inc VAT
$0 ex VAT
Part No: FNZ105
  In Stock
NUT - 5/16" UNF
Required Quantity: 6
$0 inc VAT
$0 ex VAT
Part No: SH605081
  In Stock
SET SCREW-5/16 UNF x 1''
Required Quantity: 6
$0 inc VAT
$0 ex VAT
Part No: 17H8092
  In Stock
2 points earn ($0)
$6 inc VAT
$6 ex VAT
Part No: 17H7621
  In Stock
1 points earn ($0)
$4 inc VAT
$4 ex VAT
Part No: 17H7619
  In Stock
3 points earn ($0)
$8 inc VAT
$8 ex VAT
Part No: 17H7618
  In Stock
2 points earn ($0)
$6 inc VAT
$6 ex VAT
Part No: 513118
  In Stock
$2 inc VAT
$2 ex VAT
Part No: 37H4642
  In Stock
$2 inc VAT
$2 ex VAT
Part No: 17H7949
  In Stock
$2 inc VAT
$2 ex VAT
Part No: CCT001
  In Stock
9 points earn ($0)
$23 inc VAT
$19 ex VAT
Part No: CMZ407
  In Stock
$2 inc VAT
$0 ex VAT
Part No: 3H2428
  In Stock
BLEED NIPPLE-3/8'' UNF
Required Quantity: 2
$2 inc VAT
$2 ex VAT
Part No: 21A1058
  In Stock
44 points earn ($1)
$101 inc VAT
$84 ex VAT
Part No: 21A1060
  In Stock
44 points earn ($1)
$101 inc VAT
$84 ex VAT
Part No: 21A1669
  In Stock
9 points earn ($0)
$23 inc VAT
$19 ex VAT
Part No: SPU10002
  No Longer Available
USE: 21A1669
Required Quantity: 1
$0 inc VAT
$0 ex VAT
Part No: 21A1670
  In Stock
9 points earn ($0)
$23 inc VAT
$19 ex VAT
Part No: SPU10003
  No Longer Available
USE: 21A1670
Required Quantity: 1
$0 inc VAT
$0 ex VAT
Part No: 53K3437
  No Longer Available
USE: PWZ105
Required Quantity: 4
$0 inc VAT
$0 ex VAT
Part No: SMN10005
  In Stock
LEVER KIT-HANDBRAKE (2)
Required Quantity: 1
13 points earn ($0)
$30 inc VAT
$27 ex VAT
Part No: AAU4936
  No Longer Available
USE: SMN10005
Required Quantity: 1
$0 inc VAT
$0 ex VAT
Part No: AAU4937
  No Longer Available
USE: SMN10005
Required Quantity: 1
$0 inc VAT
$0 ex VAT
Part No: 17H7612
  In Stock
6 points earn ($0)
$15 inc VAT
$13 ex VAT
Part No: GBS834AF
  In Stock
 
13 points earn ($0)
$30 inc VAT
$27 ex VAT
Part No: GWC1102
  In Stock
7 points earn ($0)
$17 inc VAT
$13 ex VAT
Part No: GWC1101
  In Stock
7 points earn ($0)
$19 inc VAT
$15 ex VAT
Part No: GWC1129
  In Stock
9 points earn ($0)
$21 inc VAT
$17 ex VAT
Part No: GWC1126
  In Stock
9 points earn ($0)
$21 inc VAT
$17 ex VAT
Part No: GWC1134
  No Longer Available
$0 inc VAT
$0 ex VAT
Part No: GWC1131
  In Stock
8 points earn ($0)
$19 inc VAT
$17 ex VAT
Part No: GRK2014
  In Stock
4 points earn ($0)
$11 inc VAT
$9 ex VAT
Part No: GRK2076
  In Stock
4 points earn ($0)
$11 inc VAT
$9 ex VAT
Part No: GRK2004
  In Stock
4 points earn ($0)
$9 inc VAT
$8 ex VAT
Part No: BHM7015
  Available to Customer Order
5 points earn ($0)
$13 inc VAT
$11 ex VAT
Part No: GRK2003
  In Stock
4 points earn ($0)
$9 inc VAT
$9 ex VAT
Part No: GBD105
  In Stock
14 points earn ($0)
$32 inc VAT
$27 ex VAT
Part No: 21A1457
  No Longer Available
$0 inc VAT
$0 ex VAT
Part No: GBD106
  In Stock
16 points earn ($0)
$38 inc VAT
$32 ex VAT
Part No: CMZ422
  In Stock
$2 inc VAT
$2 ex VAT
Part No: MINIFIN
  In Stock
125 points earn ($2)
$287 inc VAT
$239 ex VAT
Part No: GBS834FK
  No Longer Available
USE: GBK1834
Required Quantity: 1
$0 inc VAT
$0 ex VAT
Part No: MINIFINP
  In Stock
71 points earn ($1)
$161 inc VAT
$135 ex VAT
Part No: CMZ412
  In Stock
$0 inc VAT
$0 ex VAT
Part No: 21A1058KIT
  In Stock
 
166 points earn ($3)
$378 inc VAT
$315 ex VAT
Part No: 21A1060KIT
  In Stock
 
166 points earn ($3)
$378 inc VAT
$315 ex VAT
Part No: 17H7620
  In Stock
10 points earn ($0)
$23 inc VAT
$19 ex VAT
Part No: AEU1541A
  In Stock
1 points earn ($0)
$4 inc VAT
$4 ex VAT
Part No: 17H7612P
  In Stock
1 points earn ($0)
$4 inc VAT
$4 ex VAT
Backplates, Handbrake Levers and Brake Adjusters
Over the 41 years of Mini production, at least seven (and probably several more) different designs of rear brake backplate were used on all the different permutations of Mini braking systems. The engineering theory behind all the different designs was to physically stop the marriage of the wrong type of wheel cylinder (and there were several to choose from, as you'll see further down the page) to the many different braking set-ups. In the interests of your sanity and ours, plus of course commercial restraints, they have been rationalised down to... one!
         
The truth is, the market can get away with only one backplate design, so long as owners of a minority of Minis are willing to make one small modification to make the backplate appropriate for their cars (because we trust you not to try to fit the wrong wheel cylinder): On the back of most of the wheel cylinders, alongside the threaded boss for the brake pipe, is a small roll pin used to secure the cylinder in the correct position in the backplate. If the corresponding hole in the backplate is in the wrong place, simply drill a new one in the correct position. That's it.
         
Ill. No. Part No. Description Qty. Rqd. Remarks
1 21A1058KIT BACKPLATE COMPLETE ASSEMBLY, RH 1  
  21A1060KIT BACKPLATE COMPLETE ASSEMBLY, LH 1  
Backplate complete assembly includes backplate, brake shoes and springs, adjuster assembly, GWC1102 wheel cylinder (3/4" bore) and handbrake lever. Genuine AP manufacture.
         
Ill. No. Part No. Description Qty. Rqd. Remarks
2 21A1058 BACKPLATE, RH 1  
  21A1060 BACKPLATE, LH 1  
New genuine backplates are to the latest (1997 on) spec. and will require a blanking plug part no. AEU1541A to be fitted if used on a pre-1997 car.
         
Ill. No. Part No. Description Qty. Rqd. Remarks
3 AEU1541A BLANKING PLUG, backplate 2 1997 on, plus all new genuine backplates.
4 21A1669 BRACKET, handbrake cable, RH 1 1959-92.
  SPU10002 BRACKET, handbrake cable, RH 1 1992 on.
  21A1670 BRACKET, handbrake cable, LH 1 1959-92.
  SPU10003 BRACKET, handbrake cable, LH 1 1992 on.
5 SH605081 SCREW, bracket and backplate to radius arm 6  
6 53K3437 DISTANCE PIECE, bracket to backplate 4  
7 LWZ205 WASHER, locking 6  
8 FNZ105 NUT 6  
9 SMN10005 LEVER KIT, handbrake 1 Includes RH and LH levers.
10 AAU4936 LEVER, handbrake, RH 1 Included in lever kit.
11 AAU4937 LEVER, handbrake, LH 1 Included in lever kit.
12 17H7612 GAITER, handbrake lever 2 Sometimes included in wheel cylinder repair kits – check before you buy!
13 17H7620 ADJUSTER KIT, for one backplate 2 Includes 1 wedge and 2 tappets.
14 17H7619 WEDGE, adjuster 2  
15 17H7618 TAPPET, adjuster 4  
There's sometimes confusion when customers place orders as to what the component parts of the brake shoe adjuster should be called. Please note that the two parts that push against the brake shoes should be referred to as tappets, not wedges. The wedge is the screwed part that forces the tappets apart.
         
Brake Shoes and Fittings
Ill. No. Part No. Description Qty. Rqd. Remarks
16 GBS834AF BRAKE SHOE SET 1 Axle set of four 1 1/4" wide brake shoes.
17 GBS834FK BRAKE SHOE FITTING KIT 1 Axle set of four return springs.
18 17H8092 SPRING, shoe return, cylinder end 2  
19 17H7621 SPRING, shoe return, adjuster end 2  
         
Wheel Cylinders and Fittings
The only easy thing to say about Mini rear wheel cylinders is that they started in 1959 with GWC1102 and finished in 2000 with GWC1102. In the meantime, several other designs of wheel cylinder were employed, each matching the operating pressure of the system which was governed by master cylinder size, various pressure limiting valves and the presence of, or lack of, servo assistance. Another factor was the different hydraulic routes used around the car: single line, front/rear split dual line or diagonally split dual line.
         
If you are happy that the wheel cylinders already fitted to your Mini are the correct ones, then choosing a replacement wheel cylinder or a wheel cylinder repair kit is simple: each type of cylinder has a different bore diameter, so you can measure yours before choosing from the list below (there is an exception to this rule, of course - but one of the two cylinders which both have a 9/16" bore has a locating roll pin in the back, whereas the other one hasn't, so you can still tell them apart).
         
If you don't trust what's already fitted (or your car's being restored from a bodyshell and several tea chests of assorted rusty bits, so nothing's currently fitted at all), then with any luck the list below will help. You should start off by determining what hydraulic routing system your Mini has - turn to the brake pipe pages and look at the illustrations to get a clue of what to look for. If you're still undecided or unhappy, give us a call and we'll do our best to sort it out. The chances are you need GWC1102 anyway…
         
Wheel Cylinders - Single Line System, 1959-75 (Not Cooper, Cooper S or 1275 GT)
Ill. No. Part No. Description Qty. Rqd. Remarks
20 GWC1102 WHEEL CYLINDER, 3/4" bore 2 1959-62 (Mk I), with 0.75" bore master cylinder.
  GWC1101 WHEEL CYLINDER, 5/8" bore 2 1962-67 (Mk I), with 0.7" bore master cylinder.
  GWC1102 WHEEL CYLINDER, 3/4" bore 2 1967-75 (Mk II on), with 0.7" bore master cylinder.
         
Wheel Cylinders - Single Line System, 1961-69 (Cooper)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1102 WHEEL CYLINDER, 3/4" bore 2 1961-63, 997cc with callipers using 2 1/8" wide pads.
  GWC1101 WHEEL CYLINDER, 5/8" bore 2 1963-69, 997cc and 998cc with callipers using 2 3/8" wide pads.
         
Wheel Cylinders - Single Line System, 1963-71 (Cooper S)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1101 WHEEL CYLINDER, 5/8" bore 2 1963-67 (Mk I), with Type 5 1/2 servo.
  GWC1102 WHEEL CYLINDER, 3/4" bore 2 1967-69 (MkII), with Type 5 1/2 servo.
  GWC1101 WHEEL CYLINDER, 5/8" bore 2 1969-71 (Mk III), with Type 6 servo.
         
Wheel Cylinders - Single Line System, 1969-77 (1275 GT)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1101 WHEEL CYLINDER, 5/8" bore 2 1969-74, with Type 6 servo and 7 1/2" discs.
  GWC1129 WHEEL CYLINDER, 11/16" bore 2 1974-75, with 8.4" discs.
  GWC1126 WHEEL CYLINDER, 1/2" bore 2 1975-76, with 8.4" discs.
         
Wheel Cylinders - Front/Rear Split Dual Line System, 1969-2000 (All Models)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1102 WHEEL CYLINDER, 3/4" bore 2 1968-2000, with or without servo.
         
Wheel Cylinders - Diagonally Split Dual Line System, 1974-82 (Not 1275 GT)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1134 WHEEL CYLINDER, 9/16" bore, without locating pin 2 1974-75, with round reservoir master cylinder.
  GWC1131 WHEEL CYLINDER, 9/16" bore, with locating pin 2 1976-79, with square reservoir master cylinder.
  GWC1102 WHEEL CYLINDER, 3/4" bore 2 1976-82, Clubman Estate, Van and Pick Up only (diagonally split system only optional after 1980).
         
Wheel Cylinders - Diagonally Split Dual Line System, 1974-77 (1275 GT)
Ill. No. Part No. Description Qty. Rqd. Remarks
  GWC1129 WHEEL CYLINDER, 11/16" bore 2 1974-75, with round reservoir master cylinder.
  GWC1126 WHEEL CYLINDER, 1/2" bore 2 1976-77, with square reservoir master cylinder.
         
Wheel Cylinder Fittings
Ill. No. Part No. Description Qty. Rqd. Remarks
21 GRK2014 REPAIR KIT, wheel cylinder 2 For 3/4" bore cylinders (GWC1102).
  GRK2076 REPAIR KIT, wheel cylinder 2 For 5/8" bore cylinders (GWC1101).
  GRK2004 REPAIR KIT, wheel cylinder 2 For 11/16" bore cylinders (GWC1129).
  BHM7015 REPAIR KIT, wheel cylinder 2 For 1/2" bore cylinders (GWC1126).
  GRK2003 REPAIR KIT, wheel cylinder 2 For 9/16" bore cylinders (GWC1131 and GWC1134).
22 513118 BLEED SCREW, cylinder, 1/4 UNF 2 Included in GWC1102, GWC1101, GWC1129 and GWC1126 cylinder assemblies.
  3H2428 BLEED SCREW, cylinder, 3/8 UNF 2 Included in GWC1131 and GWC1134 cylinder assemblies.
23 37H4642 GASKET, wheel cylinder to backplate 2  
24 17H7949 'E' CLIP, wheel cylinder to backplate 2  
25 CCT001 TOOL, Lockheed, 'E' clip fitting 1 Makes fitting 'E' clips somewhat easier.
         
Brake Drums and Fittings
Ill. No. Part No. Description Qty. Rqd. Remarks
26 GBD105 DRUM, brake, standard 2 1959-84; not 1967-69 Cooper, 1969-84 Switzerland, Cooper S, 1275 GT or Mini 25.
  21A1457 DRUM, brake, with integral 1/4" spacer 2 1967-69 Cooper, 1969-84 Switzerland and some other European markets.
27 CMZ407 SCREW, standard brake drum to rear hub 4  
  CMZ412 SCREW, 1/4" spacer brake drum to rear hub 4  
28 GBD106 DRUM, brake, with integral 3/4" spacer 2 1963-84 Cooper S, 1275 GT and Mini 25; 1984 on, all models.
29 CMZ422 SCREW, 3/4" spacer brake drum to rear hub 4  
30 MINIFIN DRUMS, alloy finned type, with 3/4" spacer, pair, premium quality 1 Superior heat-dissipating alternative to GBD106.
  MINIFINP DRUMS, alloy finned type, with 3/4" spacer, pair, budget 1 Superior heat-dissipating alternative to GBD106.
View as:
Show items
Items 1 to 12 of 48 total
1 2 3 4
Part No: AEU1541A
  In Stock
1 points earn ($0)
$4 inc VAT
$4 ex VAT
Part No: 17H7620
  In Stock
10 points earn ($0)
$23 inc VAT
$19 ex VAT
Part No: 21A1060KIT
  In Stock
 
166 points earn ($3)
$378 inc VAT
$315 ex VAT
Part No: 21A1058KIT
  In Stock
 
166 points earn ($3)
$378 inc VAT
$315 ex VAT
Part No: CMZ412
  In Stock
$0 inc VAT
$0 ex VAT
Part No: MINIFINP
  In Stock
71 points earn ($1)
$161 inc VAT
$135 ex VAT
Part No: GBS834FK
  No Longer Available
$0 inc VAT
$0 ex VAT
Part No: MINIFIN
  In Stock
125 points earn ($2)
$287 inc VAT
$239 ex VAT
Part No: CMZ422
  In Stock
$2 inc VAT
$2 ex VAT
Part No: GBD106
  In Stock
16 points earn ($0)
$38 inc VAT
$32 ex VAT
Part No: 21A1457
  No Longer Available
$0 inc VAT
$0 ex VAT
Part No: GBD105
  In Stock
14 points earn ($0)
$32 inc VAT
$27 ex VAT
Add to cart
Items 1 to 12 of 48 total
1 2 3 4
Request a free catalogue