Clubman 1969 on

Part No: 21A471
  In Stock
21 points earn (Â¥29.37)
Â¥3,523.90 inc VAT
Â¥2,936.58 ex VAT
Part No: 21A474
  In Stock
21 points earn (Â¥29.37)
Â¥3,523.90 inc VAT
Â¥2,936.58 ex VAT
Part No: SH604051
  In Stock
SET SCREW-1/4'' UNF x 5/8''
Required Quantity: 8
Â¥75.51 inc VAT
Â¥62.93 ex VAT
Part No: LWZ204
  In Stock
WASHER-SPRING, 1/4''
Required Quantity: 8
Â¥32.16 inc VAT
Â¥26.57 ex VAT
Part No: 14A7602
  In Stock
 
1 points earn (Â¥1.40)
Â¥167.80 inc VAT
Â¥139.84 ex VAT
Part No: NH604041
  No Longer Available
USE: FNZ104
Required Quantity: 4
3 per upper hinge, 2 per lower hinge.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: PWZ104
  In Stock
Â¥43.35 inc VAT
Â¥36.36 ex VAT
Part No: 24A859
  In Stock
CLIP-BONNET PROP-FIXED END
Required Quantity: 1
1 points earn (Â¥1.40)
Â¥318.83 inc VAT
Â¥265.69 ex VAT
Part No: REPAN068
  In Stock
FLITCH REPAIR PANEL-MK3 R/H
Required Quantity: 1
Non-genuine; to late saloon specification. Will fit van and pick up.
22 points earn (Â¥30.76)
Â¥3,839.93 inc VAT
Â¥3,199.48 ex VAT
Part No: REPAN029
  In Stock
LOWER FLITCH REPAIR PANEL-R/H
Required Quantity: 1
Non-genuine.
19 points earn (Â¥26.57)
Â¥3,221.85 inc VAT
Â¥2,684.88 ex VAT
Part No: 14A8348
  In Stock
SCUTTLE CLOSING PANEL-RH
Required Quantity: 1
 
14 points earn (Â¥19.58)
Â¥2,349.27 inc VAT
Â¥1,957.72 ex VAT
Part No: REPAN069
  In Stock
FLITCH REPAIR PANEL-MK3 -L/H
Required Quantity: 1
Non-genuine; to late saloon specification. Will fit van and pick up.
22 points earn (Â¥30.76)
Â¥3,839.93 inc VAT
Â¥3,199.48 ex VAT
Part No: REPAN030
  In Stock
LOWER FLITCH REPAIR PANEL-L/H
Required Quantity: 1
Non-genuine.
19 points earn (Â¥26.57)
Â¥3,221.85 inc VAT
Â¥2,684.88 ex VAT
Part No: 14A8349
  In Stock
SCUTTLE CLOSING PANEL-LH
Required Quantity: 1
 
14 points earn (Â¥19.58)
Â¥2,349.27 inc VAT
Â¥1,957.72 ex VAT
Part No: ALA5660
  In Stock
 
22 points earn (Â¥30.76)
Â¥3,809.17 inc VAT
Â¥3,174.31 ex VAT
Part No: ALA5660P
  In Stock
Non-genuine.
14 points earn (Â¥19.58)
Â¥2,455.54 inc VAT
Â¥2,045.82 ex VAT
Part No: ALA6472
  In Stock
 
30 points earn (Â¥41.95)
Â¥5,034.15 inc VAT
Â¥4,195.12 ex VAT
Part No: ALA5661
  In Stock
22 points earn (Â¥30.76)
Â¥3,809.17 inc VAT
Â¥3,174.31 ex VAT
Part No: ALA5661P
  In Stock
Non-genuine.
14 points earn (Â¥19.58)
Â¥2,455.54 inc VAT
Â¥2,045.82 ex VAT
Part No: ALA6473
  In Stock
 
30 points earn (Â¥41.95)
Â¥5,034.15 inc VAT
Â¥4,195.12 ex VAT
Part No: HMP441001
  In Stock
SCUTTLE PANEL-FULL WIDTH
Required Quantity: 1
Pressed to 1969 on condition with additional wiper piercings.
154 points earn (Â¥215.35)
Â¥25,883.90 inc VAT
Â¥21,569.91 ex VAT
Part No: REPAN033
  In Stock
SCUTTLE END REPAIR PANEL-RH
Required Quantity: 1
Non-genuine.
16 points earn (Â¥22.37)
Â¥2,833.11 inc VAT
Â¥2,360.45 ex VAT
Part No: REPAN034
  In Stock
SCUTTLE END REPAIR PANEL-LH
Required Quantity: 1
Non-genuine.
16 points earn (Â¥22.37)
Â¥2,833.11 inc VAT
Â¥2,360.45 ex VAT
Part No: ALA5790
  In Stock
HEADER RAIL ASSEMBLY-'67 ON
Required Quantity: 1
1967 on.
95 points earn (Â¥132.85)
Â¥15,966.63 inc VAT
Â¥13,305.53 ex VAT
Part No: 14A8015
  In Stock
Included in header rail assembly.
4 points earn (Â¥5.59)
Â¥819.45 inc VAT
Â¥682.41 ex VAT
Part No: CZH3140
  In Stock
1969 on; includes header rail and boxing plates.
235 points earn (Â¥328.62)
Â¥39,434.14 inc VAT
Â¥32,861.78 ex VAT
Part No: CZH594
  In Stock
For Clubman and 1275GT saloons.
9990 points earn (Â¥13,969.75)
Â¥1,676,370.41 inc VAT
Â¥1,396,975.34 ex VAT
Part No: CZH588
  No Longer Available
For Clubman and 1275GT saloons.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH3190
  No Longer Available
1969-75; for solid mounted front subframe (MkIII).
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH3223
  No Longer Available
1976-82; for rubber mounted front subframe (MkIV).
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH408
  In Stock
WING-CLUBMAN-GENUINE-RH
Required Quantity: 1
 
155 points earn (Â¥216.75)
Â¥26,009.75 inc VAT
Â¥21,674.79 ex VAT
Part No: CZH408P
  No Longer Available
Non-genuine.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH409
  In Stock
WING-CLUBMAN-GENUINE-LH
Required Quantity: 1
 
155 points earn (Â¥216.75)
Â¥26,009.75 inc VAT
Â¥21,674.79 ex VAT
Part No: CZH409P
  No Longer Available
Non-genuine.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: HMP441039
  In Stock
1969-75; for solid mounted front subframe.
245 points earn (Â¥342.60)
Â¥41,112.19 inc VAT
Â¥34,260.16 ex VAT
Part No: HMP441040
  In Stock
1976 on; for rubber mounted front subframe.
245 points earn (Â¥342.60)
Â¥41,112.19 inc VAT
Â¥34,260.16 ex VAT
Part No: CZH120
  In Stock
 
19 points earn (Â¥26.57)
Â¥3,272.19 inc VAT
Â¥2,726.83 ex VAT
Part No: CZH121
  In Stock
 
19 points earn (Â¥26.57)
Â¥3,272.19 inc VAT
Â¥2,726.83 ex VAT
Part No: CZH149
  In Stock
SLAM PANEL-CLUBMAN-GENUINE
Required Quantity: 1
 
55 points earn (Â¥76.91)
Â¥9,229.27 inc VAT
Â¥7,691.06 ex VAT
Part No: CZH149P
  In Stock
Non-genuine.
25 points earn (Â¥34.96)
Â¥4,259.45 inc VAT
Â¥3,549.07 ex VAT
Part No: CZH155
  In Stock
STIFFENER-CLUBMAN SLAM PANEL
Required Quantity: 1
 
39 points earn (Â¥54.54)
Â¥6,544.39 inc VAT
Â¥5,453.66 ex VAT
Part No: CZH563
  In Stock
1969-75; for solid mounted front subframe.
125 points earn (Â¥174.80)
Â¥20,975.61 inc VAT
Â¥17,479.67 ex VAT
Part No: AAM1022
  In Stock
FRONT PANEL-CLUBMAN-76 ON-GEN
Required Quantity: 1
1976 on; for rubber mounted front subframe.
125 points earn (Â¥174.80)
Â¥20,975.61 inc VAT
Â¥17,479.67 ex VAT
Part No: AAM1022P
  No Longer Available
USE: AAM1022
Required Quantity: 1
1976 on; non-genuine.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH520
  No Longer Available
USE: CZH2609
Required Quantity: 1
1969-70; fits to hinges with screws.
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH2609
  In Stock
BONNET-CLUBMAN
Required Quantity: 1
1970 on; fits to hinges with nuts.
199 points earn (Â¥278.28)
Â¥33,393.16 inc VAT
Â¥27,827.64 ex VAT
Part No: CZH200
  No Longer Available
PROP-BONNET-CLUBMAN
Required Quantity: 1
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: 14A366
  In Stock
14 points earn (Â¥19.58)
Â¥2,493.30 inc VAT
Â¥2,077.98 ex VAT
Part No: CZH410
  In Stock
 
250 points earn (Â¥349.59)
Â¥41,951.21 inc VAT
Â¥34,959.34 ex VAT
Part No: CZH414
  In Stock
INNER WING-CLUBMAN RH
Required Quantity: 1
 
215 points earn (Â¥300.65)
Â¥36,078.04 inc VAT
Â¥30,065.03 ex VAT
Part No: CZH3062
  In Stock
 
69 points earn (Â¥96.49)
Â¥11,578.53 inc VAT
Â¥9,648.78 ex VAT
Part No: CZH567
  In Stock
 
275 points earn (Â¥384.55)
Â¥46,146.33 inc VAT
Â¥38,455.28 ex VAT
Part No: CZH569
  In Stock
INNER WING-CLUBMAN-LH
Required Quantity: 1
 
275 points earn (Â¥384.55)
Â¥46,146.33 inc VAT
Â¥38,455.28 ex VAT
Part No: CZH3063
  No Longer Available
USE: CZH569
Required Quantity: 1
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH570
  In Stock
 
45 points earn (Â¥62.93)
Â¥7,551.22 inc VAT
Â¥6,292.68 ex VAT
Part No: ALA5696
  No Longer Available
USE: 14A6683
Required Quantity: 1
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: WC001
  In Stock
DINITROL RUST CONVERTER- 1 LITRE
Required Quantity: As required
51 points earn (Â¥71.32)
Â¥8,639.15 inc VAT
Â¥7,198.83 ex VAT
Part No: WC002
  In Stock
17 points earn (Â¥23.77)
Â¥2,893.24 inc VAT
Â¥2,410.80 ex VAT
Part No: WC003
  In Stock
101 points earn (Â¥141.24)
Â¥17,089.53 inc VAT
Â¥14,241.04 ex VAT
Part No: WC004
  In Stock
DINITROL 4941 UNDERBODY WAX- 1 LITRE
Required Quantity: As required
13 points earn (Â¥18.18)
Â¥2,209.43 inc VAT
Â¥1,841.66 ex VAT
Part No: WC005
  In Stock
SMOOTHRITE BRUSHABLE-750ml- BLACK
Required Quantity: As required
16 points earn (Â¥22.37)
Â¥2,768.78 inc VAT
Â¥2,307.32 ex VAT
Part No: WC006
  In Stock
HAMMERITE-BRUSHABLE-500ml- BLACK
Required Quantity: As required
8 points earn (Â¥11.19)
Â¥1,382.99 inc VAT
Â¥1,152.26 ex VAT
Part No: WC007
  In Stock
SEAM SEALER-BRUSHABLE- 1kg
Required Quantity: As required
19 points earn (Â¥26.57)
Â¥3,241.43 inc VAT
Â¥2,701.66 ex VAT
Part No: WC013
  In Stock
SEAM SEALER-POLYURETHANE-300ml CARTRIDGE
Required Quantity: As required
13 points earn (Â¥18.18)
Â¥2,347.87 inc VAT
Â¥1,956.32 ex VAT
Part No: WC008
  In Stock
SEALER-WELD THROUGH-ZINC RICH-AREOSOL-400ml
Required Quantity: As required
20 points earn (Â¥27.97)
Â¥3,473.56 inc VAT
Â¥2,894.63 ex VAT
Part No: WC009
  In Stock
WINDSCREEN SEALANT- 300gm CARTRIDGE
Required Quantity: As required
12 points earn (Â¥16.78)
Â¥2,077.98 inc VAT
Â¥1,731.19 ex VAT
Part No: STEEL18SWG
  In Stock
SHEET STEEL-18 SWG (1.2mm) PER SQUARE FOOT
Required Quantity: As required
3 points earn (Â¥4.20)
Â¥604.10 inc VAT
Â¥503.41 ex VAT
Part No: STEEL20SWG
  In Stock
SHEET STEEL-20SWG (0.8mm)-PER SQ.FOOT
Required Quantity: As required
2 points earn (Â¥2.80)
Â¥500.62 inc VAT
Â¥416.72 ex VAT
Part No: ALA5697
  No Longer Available
USE: 14A6684
Required Quantity: 1
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Ill. No. Part No. Description Qty. Rqd. Remarks
         
Bodyshells      
If you are faced with repairing a severely corroded or accident damaged Mini, opting instead for a new British Motor Heritage bodyshell would be a wise move indeed.  A new bodyshell compares very favourably in cost against a heavy rebuild of your old bodyshell, and at the end of the job provides the degree of build integrity that old, repaired bodies simply cannot match.  Nowhere is this statement more relevant than when the subject is the Mini Clubman bodyshell.  Because the extra space in the engine bay allowed the fitment of more extreme power plants, Mini Clubmans were always (still are) favourite candidates for custom and high performance special builds.  A taut, fatigue-free new bodyshell allows for safer enjoyment of uprated power, suspension and braking packages. 
         
British Motor Heritage Mini bodyshells are supplied in two conditions of build: Body Complete Assembly, fitted with doors, bonnet and boot lid, or Body Less Doors, which as the name suggests are supplied less the ‘closure’ panels and associated hinges.  The panels, pressed in the original equipment dies, are then assembled by original processes on the jigs and fixtures used by Rover Group and its predecessors.  
         
The completed bodyshells are usually electrophoretically coated, seam sealed and then primed with water-bourne paint to the latest industry standards, ready for your colour coat application.  Occasionally, for manufacturing reasons, BMH may vary the finishing specifications; please contact us before placing your bodyshell order to establish whether there are any changes that you should be aware of.
         
Because of the many detail changes made on an annual - if not more frequent, sometimes - basis while the Mini was in production, it is strongly advised that you carry out ‘dry run’ test fitments of as many parts as you can prior to top coat painting the bodyshell.  By doing this, you can make any adjustments that are necessary to the bodyshell without the frustration of damaging new paintwork.
         
Also ensure that all captive and weld nut threads on the bodyshell are cleared of paint after the top coat has been applied - in fact, make it the first job before starting to fit out the bodyshell.  This will avoid the other great frustrations of sheared screws and captive nuts that have broken free when too much force has been used to get the screw threads to cut through the paint!  Clearing the threads can be easily achieved with a set of imperial UNF threadform taps (plus a couple of metric ones for later models), but do go gently otherwise the tap will strip the thread you’re trying to clear.   
         
The following are the specifications of bodyshell available at time of writing.       
         
Clubman Saloon Bodyshells (1976 on)     
These bodyshells are most suitable for models built from 1976 onwards.  They may also be used for some earlier models built between 1969 and 1975, if the later rubber mounted front subframe is utilised; please phone for details.  While they are as close as reasonably possible to original specification, for commercial reasons these bodyshells are built with a handful of later specification components, which may require slight adjustments to be made for fitting out.
  CZH594 BODY COMPLETE ASSEMBLY 1 For Clubman and 1275GT saloons.
1 CZH588 BODY LESS DOORS ASSEMBLY 1 For Clubman and 1275GT saloons.
         
Front End Assembly       
2 CZH3190 FRONT END ASSEMBLY 1 1969-75; solid subframe mounts (MkIII). 
  CZH3223 FRONT END ASSEMBLY 1 1976-82; rubber subframe mounts (MkIV).
CZH3190 includes a depression in the dash crossmember giving clearance for waxstat carburetters; the crossmember is therefore visually different from that in early models.  The toeboard is designed for rod change gearboxes and may need some alteration for use on very early models with a remote gear change.  
For details of the dash included in a front end assembly, please refer to the Dash Assembly section.
3 21A471 BRACKET ASSY., front shock absorber, RH 1 Not Hydrolastic suspension models.
  21A474 BRACKET ASSY., front shock absorber, LH 1 Not hydrolastic suspension models.
4 SH604051 SCREW, bracket attaching 8  
5 LWZ204 WASHER, locking 8  
         
Front Wings, Front Panel and Bonnet    
6 CZH408 FRONT WING, RH 1  
  CZH408P FRONT WING, RH 1 Non-genuine.
7 CZH409 FRONT WING, LH 1  
  CZH409P FRONT WING, LH 1 Non-genuine.
8 14A7602 SUPPORT ANGLE, wing to A panel 2  
9 HMP441039 GRILLE COMPLETE ASSEMBLY 1 1969-75; solid subframe mountings.  
  HMP441040 GRILLE COMPLETE ASSEMBLY 1 1976 on; rubber subframe mountings. 
10 CZH120 MOUNTING PANEL, headlamp, RH 1  
11 CZH121 MOUNTING PANEL, headlamp, LH 1  
12 CZH149 BONNET LOCKING PLATFORM 1  
  CZH149P BONNET LOCKING PLATFORM 1 Non-genuine.
13 CZH155 SUPPORT, bonnet locking platform 1  
14 CZH563 FRONT VALANCE ASSEMBLY 1 1969-75; solid subframe mountings.  
  AAM1022 FRONT VALANCE ASSEMBLY 1 1976 on; rubber subframe mountings. 
  AAM1022P FRONT VALANCE ASSEMBLY 1 1976 on; non-genuine.
15 CZH520 BONNET ASSEMBLY 1 1969-70; fits to hinges with screws.
  CZH2609 BONNET ASSEMBLY 1 1970 on; fits to hinges with nuts.
16 SH604051 SCREW, hinge to bonnet 4 1969-70.
17 PWZ104 WASHER, plain 8 1969-70.
18 LWZ204 WASHER, locking 4 1969-70.
19 NH604041 NUT, hinge to bonnet 4 1970 on.
20 LWZ204 WASHER, locking 4 1970 on.
21 PWZ104 WASHER, plain 4 1970 on.
22 CZH200 ROD, bonnet prop 1  
23 24A859 CLIP, prop rod 1  
24 14A366 SAFETY CATCH ASSEMBLY 1  
         
Inner Wings      
An inner wing complete assembly includes inner wing, A panel, gusset and front pillar stiffener.
25 CZH410 INNER WING COMPLETE ASSEMBLY, RH 1  
26 CZH414 INNER WING ASSY., without A panel, RH  1  
27 CZH3062 INNER WING REPAIR, front half, RH 1  
28 REPAN068 INNER WING REPAIR, rear, full height, RH  1 Non-genuine.
29 REPAN029 INNER WING REPAIR, rear lower, RH 1 Non-genuine.
30 ALA5660 A PANEL, RH 1  
  ALA5660P A PANEL, RH 1 Non-genuine.
31 14A8348 GUSSET, A panel to inner wing, RH 1  
32 ALA6472 STIFFENER ASSEMBLY, front pillar, RH 1  
33 CZH567 INNER WING COMPLETE ASSEMBLY, LH 1  
34 CZH569 INNER WING ASSY., without A panel, LH  1  
35 CZH3063 INNER WING REPAIR, front half, LH 1  
36 REPAN069 INNER WING REPAIR, rear, full height, LH  1 Non-genuine.
37 REPAN030 INNER WING REPAIR, rear lower, LH 1 Non-genuine.
38 ALA5661 A PANEL, LH 1  
  ALA5661P A PANEL, LH 1 Non-genuine.
39 14A8349 GUSSET, A panel to inner wing, LH 1  
40 ALA6473 STIFFENER ASSEMBLY, front pillar, LH 1  
41 CZH570 COWLING ASSEMBLY, radiator 1  
The gussets 14A8348 and 14A8349 also serve the purpose of closing the space under the lower corners of the windscreen frame.  They’re fitted to all Minis, not just Clubmans, and are contenders for the title of most rust-prone panels on the car.  Whenever you remove a wing, have a look under the windscreen lower corner while you can easily get access to it, and check the condition of the gusset (if it’s still there at all).  It’s a very good idea to replace it while you can get to it, rather than waiting for the telltale leak to start behind the corner of the dashboard. 
         
Windscreen       
42 CZH3140 WINDSCREEN COMPLETE ASSEMBLY 1 Includes header rail and boxing plates. 
43 HMP441001 WINDSCREEN REPAIR, lower, full width 1  
44 REPAN033 WINDSCREEN REPAIR, lower corner, RH 1 Non-genuine.
45 REPAN034 WINDSCREEN REPAIR, lower corner, LH 1 Non-genuine.
46 ALA5790 HEADER RAIL ASSEMBLY 1  
47 14A8015 TAPPED PLATE, interior mirror 1 Included in header rail assembly.
48 ALA5696 BOXING PLATE, windscreen pillar, RH 1  
49 ALA5697 BOXING PLATE, windscreen pillar, LH 1  
         
Body Shop Consumables    
Somerford Mini is proud to be able to offer the Dinitrol range to protect your cherished Mini from the dreaded rust threat.  Acclaimed as ‘Best in Test’ by Practical Classics magazine, Dinitrol 3125 cavity wax and 4941 underbody wax are used by the UK armed forces and protect their vehicles (with intact underbody paint) in up to 1.5 metres of salt water!
The Dinitrol Complete Rust-Proofing Kit includes a 500ml can of Rust Converter, two 1 litre cans of 3125 Cavity Wax, three 1 litre cans of 4941 Underbody Wax, the Professional Wax Injection Kit, a 10mm drill and a car set of 10mm body plugs - everything you need to give your Mini theultimate rust protection.
50 WC001 RUST CONVERTER, ‘Dinitrol’ A/R 1 litre can.
51 WC002 CAVITY WAX, ‘Dinitrol 3125 Corromax’  A/R 1 litre can.
52 WC003 RUST PROOFING KIT, ‘Dinitrol’ A/R  
53 WC004 UNBERBODY WAX, ‘Dinitrol 4941’ A/R 1 litre can.
54 WC005 ‘SMOOTHRITE’ PAINT, brush-on, black A/R 500ml can.
55 WC006 ‘HAMMERITE’ PAINT, brush-on, black A/R 500ml can.
56 WC007 SEAM SEALANT, brush-on A/R 1 kg can.
57 WC013 SEAM SEALANT, polyurethane A/R 300ml cartridge.
58 WC008 ZINC-RICH SEALANT, weld-through A/R 400ml aerosol.
59 WC009 WINDSCREEN SEALANT A/R 300ml cartridge.
         
We also stock bright mild steel sheet for localised repair use.  Sold by the square foot, it is available in 18SWG and 20SWG thicknesses: 
60 STEEL18SWG STEEL SHEET, 18SWG A/R Sold per square foot.
61 STEEL20SWG STEEL SHEET, 20SWG A/R Sold per square foot.
View as:
Show items
Items 1 to 12 of 57 total
1 2 3 4 5
Part No: ALA5697
  No Longer Available
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: ALA5696
  No Longer Available
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH570
  In Stock
 
45 points earn (Â¥62.93)
Â¥7,551.22 inc VAT
Â¥6,292.68 ex VAT
Part No: CZH3063
  No Longer Available
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH569
  In Stock
 
275 points earn (Â¥384.55)
Â¥46,146.33 inc VAT
Â¥38,455.28 ex VAT
Part No: CZH567
  In Stock
 
275 points earn (Â¥384.55)
Â¥46,146.33 inc VAT
Â¥38,455.28 ex VAT
Part No: CZH3062
  In Stock
 
69 points earn (Â¥96.49)
Â¥11,578.53 inc VAT
Â¥9,648.78 ex VAT
Part No: CZH414
  In Stock
 
215 points earn (Â¥300.65)
Â¥36,078.04 inc VAT
Â¥30,065.03 ex VAT
Part No: CZH410
  In Stock
 
250 points earn (Â¥349.59)
Â¥41,951.21 inc VAT
Â¥34,959.34 ex VAT
Part No: 14A366
  In Stock
14 points earn (Â¥19.58)
Â¥2,493.30 inc VAT
Â¥2,077.98 ex VAT
Part No: CZH200
  No Longer Available
Â¥0.00 inc VAT
Â¥0.00 ex VAT
Part No: CZH2609
  In Stock
1970 on; fits to hinges with nuts.
199 points earn (Â¥278.28)
Â¥33,393.16 inc VAT
Â¥27,827.64 ex VAT
Add to cart
Items 1 to 12 of 57 total
1 2 3 4 5
Request a free catalogue